James Binnion Metal Arts
mokume-gane
Custom Quote Form

Please note any questions or design ideas in the comments section.

Questions?  Text Terry at 360-961-3295

Call us at 877-408-7287 or email [email protected]

Get our free CD catalog filled with information, photos and descriptions of our mokume!

Use the drop down menu to design your ring.  

Your Name:

Your E-mail Address:
* Please double check your E-mail address.
If it is not correct we cannot send you a quote!
Security Code

Please enter the number and letter combinations you see to the left.
item1Leave this blank
item2Leave this blank

The first thing you need to decide is what combination of metals you want for your ring. Our standard combinations are listed in the pull down menu below. However we do make special combinations; if you do not see a combination you want please ask about it in the comments box below.

Ring 1 Material   

Ring size and width are a factor in the cost of the ring. If you know your ring size then type it in below. If not leave it blank and we will provide a general quote. If you decide to place an order with us we will send out finger gauges to determine your correct ring size for the best fit.

Ring 1 Size
Width*
Profile
* Three-quarter Round rings are only available in 3.5 mm width

Ring Profiles Ring Profiles
Surface Texture
Etched rings must contain sterling silver.

Etching is done by by dipping the ring in an chemical that dissolves only the sterling silver. By leaving it in the chemical for a short period of time a small amount of the silver is removed. This creates a lower area where the silver was and provides a surface texture that enhances the pattern of the ring.

Option 1: Rails

Rails are bands or trim that are applied to the sides of the ring. They can be either round or "square" and can be made in any of the available metals.


Rail Shape
Rail Metal
Rails cannot be put on rings that are less than 5mm wide

Option 2: Liner

Liners are a inner band of metal that is fabricated to fit and then attached inside the ring. A liner can be made from any metal listed in the menu below. If you ring has rails the liner can be of a matching metal or a different metal. The liner does not change the ring size.

Liner Material
Ring 1 Comments or Questions:
If you want a quote for additional rings continue to next field. Otherwise click here to go to the end of the form

The first thing you need to decide is what combination of metals you want for your ring. Our standard combinations are listed in the pull down menu below. However we do make special combinations; if you do not see a combination you want please ask about it in the comments box below.

Ring 2 Material   

Ring size and width are a factor in the cost of the ring. If you know your ring size then type it in below. If not leave it blank and we will provide a general quote. If you decide to place an order with us we will send out finger gauges to determine your correct ring size for the best fit.

Ring 2 Size
Ring 2 Width*
Ring 2 Profile
* Three-quarter Round rings are only available in 3.5 mm width

Ring Profiles Ring Profiles
Surface Texture
Etched rings must contain sterling silver.

Etching is done by by dipping the ring in an chemical that dissolves only the sterling silver. By leaving it in the chemical for a short period of time a small amount of the silver is removed. This creates a lower area where the silver was and provides a surface texture that enhances the pattern of the ring.

Option 1: Rails

Rails are bands or trim that are applied to the sides of the ring. They can be either round or "square" and can be made in any of the available metals.


Ring 2 Rail Shape
Ring 2 Rail Metal
Rails cannot be put on rings that are less than 5mm wide

Option 2: Liner

Liners are a inner band of metal that is fabricated to fit and then attached inside the ring. A liner can be made from any metal listed in the menu below. If you ring has rails the liner can be of a matching metal or a different metal. The liner does not change the ring size.

Ring 2 Liner Material
Ring 2 Comments or Questions:

HACKER SAFE certified sites prevent over 99.9% of hacker crime.